Give Us a Sign! - The Story Behind the Dedalus Wine Sign

IMG_8228.JPG

Every once in a while we get signage jobs. No two signs are alike for us and the Dedalus Wine sign was no exception. We worked with the owners of the store to develop an aesthetic that was old and new all at once. 

We did a pretty standard sub frame assembly that would allow us to first hang a sub frame to attach the final sign to. All that is pretty standard. What isn't standard is the wood used for this sign. UVM was taking down their old stadium when someone there realized that the seats on the bleachers which had been outside for over 100 years was redwood. Really old redwood. Like 2000 plus years old Redwood. 

Tim James our resident woodworker has a pile of this precious material in the shop so we put it to use. 

IMG_8179.JPG
 Tim applying the first coat of Danish oil to the redwood. 

Tim applying the first coat of Danish oil to the redwood. 

We used the plasma cutter at Generator to make the letters for the sign out of 1/4" Aluminum which was then powdercoated by our friends at Eco Finish Solutions in the Intervale. 

 Plasma Cutter 

Plasma Cutter 

We then had to make some templates on our laser cutter to place the letters perfectly in the frame and locate all the holes to be drilled for mounting. We 3D printed black spacers for the threaded rods and applied the letters which were attached with nuts on the backside of the wood. 

IMG_8206.JPG

After placing and locating the letters we drilled out the wood and mounted up the final product. 

IMG_8341.JPG

After all that is was off to the front of our building here at 388 Pine St for a good old fashioned install. 

 Tim and Matt sussing it out. 

Tim and Matt sussing it out. 

IMG_8407.JPG

We'd like to thank Jason and everyone at Dedalus, Tim James, and Eco Finish Solutions for their hard work and understanding. When you come to visit us be sure to stop by Dedalus for all your wine, cheese and charcuterie needs!